UPR's New Breather Filters are made from the highest quality materials and using the dry filter design. Running the dry filters will give you extended product life and never restrict airflow like wet filters. Our filters have been designed to always look brand new. Choosing the best Urethane and running a black filter element ensures you will always look clean and new, unlike other colored filters that can get an oily residue staining the material permanently.
5012-05 2.5" Tall Element Push On
These are also a great fit for any product or application that requires an 1.35" ID breather filter.
This push on filter is an direct replacement for all UPR 5029 and 5050 Breather Tanks and Catch Cans (UPR 5029 and 5050's can accept push on or screw in filters)
5012-06 1" Tall Element Screw In /5012-07 1.5" Tall Element Screw In
These are also a great fit for any product or application that uses a 1.25-inch hole size like many Ford, Chevy, Dodge, and other vehicles
These screw-in filters are a direct replacement for all UPR 5029 and 5050 Breather Tanks and Catch Cans (UPR 5029 and 5050's can accept push on or screw in filters)
5012-08 1" Tall Element Push On
These are also a great fit for any product or application that uses a 1.5-inch ID neck like many valve covers and one way breathers applications.
The Push-on valve cover breather filters are a direct replacement all UPR 5013 series One way breathers. Will require a Hose clamp if used on 5029 Breather tanks.
Pushes onto or over 1.5" Breather or Valve Cover neck
5012-09 2.5" Tall Element Push On
These are also a great fit for any product or application that uses a 1.5-inch ID neck like many valve covers.
Can be used with 5013 one way breather but will require enough hood clearance as they are taller than the standard filter.
Pushes onto or over 1.5" Breather or Valve Cover neck
*NOTE: If you have a fuel injected late model vehicle, installing this filter in place of the oil fill cap will require changes to the MAF tune since it will allow air to enter after the Mass Air Flow sensor.
THIS PART DOES NOT CARRY AN CARB EO NUMBER, AND THEREFORE IS FOR RACING / OFF ROAD USE ONLY. NOT FOR SALE OR USE IN CALIFORNIA DUE TO CARB/EMISSIONS. ALL CALIFORNIA ORDERS WILL BE CANCELLED AND REFUNDED
Product Features:
5012-05
» Black
» 2.5" Tall
» Push On
» 3" Diameter
» For 1.35" ID Valve Cover Neck
» Original Replacement for 5029 Breather Tank and 5050 Catch Can
» Dry Hi-Flow Performance Filter
5012-06
» Black
» 1" Tall
» Screw In
» 3" Diameter
» For 1.25" Threaded Hole Size
» Original Replacement for 5029 Breather Tank and 5050 Catch Can
» Dry Hi-Flow Performance Filter
5012-07
» Black
» 1.75" Tall
» Screw In
» 3" Diameter
» For 1.25" Threaded Hole Size
» Dry Hi-Flow Performance Filter
5012-08
» Black
» 1" Tall
» Push On
» 3" Diameter
» Original Replacement for 5013 One Way Breather
» 1.50" ID Neck Size pushes onto or over 1.5" Breather or Valve Cover neck
» Dry Hi-Flow Performance Filter
5012-09
» Black
» 2.5" Tall
» Push On
» 3" Diameter
» 1.50" ID Neck Size pushes onto or over 1.5" Breather or Valve Cover neck
» Dry Hi-Flow Performance Filter
Fits These Vehicles:
Fits most makes and models.