Description
xBrand New UPR Signature Series Billet Catch Can System with Mounting Bracket for your 2011 to Present 6.4L equipped Challenger, Charger, and 300. This Catch Can was developed to out perform all the other 2 chamber catch cans with a patented internal diffuser system that forces the oil to be released into the catch can from a lower chamber then the fresh air can exit through the upper chamber. This is because all the traditional 2 chamber catch cans have two chambers side by side and with a screen that separates them. Side by Side chambers with a simple screen or honeycomb filter allow oil to be sucked right across and out the exit port of the catch can.
Most of the top brands out there are what is called 2 chamber pull through catch cans as they all allow as much oil to be pulled through them as they collect and this is why they can have such small oil capacities and be drained so infrequently. With the UPR Catch Can you have to check them every 500 miles to maintain the oil level. Where as other catch cans usually say to check them every 2000 to 3000 miles and you should be fine. UPR takes pride in their products and always strives to deliver the best looking and performing products.
The UPR Oil Catch Can features a three chamber design CNC machined from 6061 Billet Aluminum unlike some of our competitors models that are single chamber tanks that don't properly trap the oil or debris.
All UPR Catch Cans are machined from 6061 Billet Aluminum and use forged aluminum fittings along with Viton O-rings and the highest quality Braided Hoses on every model. We don't sell you a catch can and with all the rubber or plastic hoses and plastic fittings and then tell you to get the best you have to upgrade your hose and fittings. With UPR it all comes STANDARD at no extra cost!
You will see improved MPG and Improved Performance throughout the Entire RPM range
Installs in 20-30 minutes or less.
THIS PART DOES NOT CARRY AN CARB EO NUMBER, AND THEREFORE IS FOR RACING / OFF ROAD USE ONLY. NOT FOR SALE OR USE IN CALIFORNIA DUE TO CARB/EMISSIONS. ALL CALIFORNIA ORDERS WILL BE CANCELLED AND REFUNDED
Product Features:
» Show Quality Finish
» 1/2" Nickel 90* fittings
» Can measures 4.75" x 2.5"
» Easy 20-30 minute install
» 1/2" Oil Resistant Hose included
» Prevents Oil from Entering Intake
» Improves Fuel Economy & Performance
» Stainless Steel Mesh Filter Material
» High Quality CNC Machined Billet Aluminum
» Available in Satin or Black - Select Finish Above
» 1/2" Nickel 90* fittings
» Can measures 4.75" x 2.5"
» Easy 20-30 minute install
» 1/2" Oil Resistant Hose included
» Prevents Oil from Entering Intake
» Improves Fuel Economy & Performance
» Stainless Steel Mesh Filter Material
» High Quality CNC Machined Billet Aluminum
» Available in Satin or Black - Select Finish Above
Fits These Vehicles:
2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 Charger 6.4L 392.
2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 Challenger 6.4L 392.
2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 Chrysler 300 SRT8 6.4L 392.
Made in the USA!
Q & A
Question: Does your hose fall apart or collapse?
Answer: No we've upgraded to Oil Resistant Performance Hose, not heater hose or rubber hose.
Question: Does your Billet Catch Can Kit come with a warranty?
Answer: Yes we stand behind all of products and never make excuses.
Question: Why is your Billet Catch Can priced so much lower than the competition?
Answer: Volume in production guarantee's the best deals on certified materials and US labor.
Answer: No we've upgraded to Oil Resistant Performance Hose, not heater hose or rubber hose.
Question: Does your Billet Catch Can Kit come with a warranty?
Answer: Yes we stand behind all of products and never make excuses.
Question: Why is your Billet Catch Can priced so much lower than the competition?
Answer: Volume in production guarantee's the best deals on certified materials and US labor.
Vehicle Fitment
x- Choosing a selection results in a full page refresh.