UPR LS Swap Adapter Plates with Adjustable Urethane Motor Mounts (fits Mustang)

     Make your LS engine swap easier with a pair of these UPR Motor Mount Adapter Swap plates and our Adjustable Urethane LS Motor Mounts for use with UPR LS Swap Adapter Plates. These plates will bolt to your steel or aluminum LS block and allows you to use a UPR Adjustable Urethane mounts with any K-member that accepts a 4.6 stock style mount on a 4.6 K member. The plate is made of 1/4" thick mild steel and precision laser cut for a perfect fit. No cutting or drilling required and all Grade 10.9 hardware included.

The mounts are based on a 4.6 motor mount and will fit any 79-04 Mustang using a 4.6 K-member. These all new motor mounts allow for 1/4" height adjustments from 1/4" lower than stock up to 1/2" higher than stock to fine tune your oil pan, steering rack or hood clearance issues commonly found with LS engine swaps. They also feature 5/8" of adjustment so the engine can be placed all the way in the back of the engine bay or up to 5/8" forward. Utilizing Energy Suspension Urethane Bushings available in 2 different durometers for Street and Street/Strip they are fully serviceable. No longer will you have to replace the entire mount when the bushings wear out or have to buy a new set of motor mounts if you wish to change bushings. Solid bushings are also available if you wish to get more serious and you wish to focus on the race track instead of a street or street/strip car. The base mount is made from Mild Steel, tig welded and silver powdercoated for a durable finish. All hardware is stainless steel or zinc plated. Great for use on any high performance application or just to make sure your car drive smoother and react better.

 

These LS adjustable mounts will NOT fit a 4.6/5.4 Modular engine or 5.0/5.2 Coyote engine.

 

Installs in 45 minutes or less. Includes 2 short and 2 long stainless steel motor mount studs that are interchangeable depending how many spacers used in height adjustment.

» 45 Minute Install
» Mild Steel Construction

» Silver Powdercoated Finish

» Stainless Steel Motor Mount Stud
» Engine can be lowered 1/4" or raised 1/2"

» Replaceable Energy Suspension Bushings

» Must be used with UPR LS Swap Adapter Plates (part # 3013-09 or buy both as a kit 3013-103, 104, 105)

» Available Street or Street/Strip Bushings or Solid Aluminum Bushings - Select Above

 

1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 Mustang using a 4.6 K-member.