Description
x The UPR Plug N Play™ Fender Mount Catch Can Features Multiple Chamber and Multiple Stages along with a complex series of Coalescing Filters at different micron levels. Along with being the only Plug N Play™ Catch Can System featuring a solid mount to the passenger side fender. This system also features a quick release knob that allows you to push the button on the fittings to be able to remove the entire catch can without any tools. Custom driver side Plug N Play™ PCV Hose with our exclusive coalescing filter installed to control oil. Hellcat owners should be aware of the 2-chamber catch cans that run a screen like the units listed below They are just inferior copies of one another without any improvements to the design or oil separation performance. Moroso Catch Can Inferior 2 Chamber Pull Through Oil Catch Can with Generic Screen SpeedLogix Catch Can Inferior 2 Chamber Pull Through Oil Catch Can with Generic Screen Billet Technology Catch Can Inferior 2 Chamber Pull Through Oil Catch Can with Generic Screen The Lack of efficiency in 2-chamber Catch Cans has been tested and proven to allow as much oil into the intake as it collects not providing a true solution for oil ingestion into the manifold and combustion chamber. Mainly because the design requires a better-engineered diffuser system and not just a generic screen. It's very important to catch as much oil as possible. The primary function of an oil separation system is to eliminate fuel degradation and any possibility of engine knock known as detonation from oil entering the combustion chamber.
This kit also has the option to add the CSCC for the Driver side of the PCV system. The CSCC makes sure you are fully protected at both ends of the PCV system. (Great protection and ideal for all driving situations) Manufactured from Domestic T-6 6061 Aluminum bar stock and finished off using only the best Diamond cutters to exceed your expectations of what a superior product should fit and look like. UPR is the largest aftermarket catch can manufacturer in the country. Continually improving our designs to stay ahead of the competition and give you the cutting edge technology of tomorrow today. We are so confident we offer an unconditional warranty on our products to let you know you can always count on UPRproducts.
Installs in 20-25 minutes or less.
Optional Parts:
UPR Billet Pro Series Check Valve:
These are larger higher flowing check valves than the standard check valve. It will increase the vacuum through the catch can and deliver better crankcase evacuation. The improved crankcase evacuation translates to increased MPG and more responsive low speed drivability. The arrow printed on the check valve will always need to face away from the catch can. There is no down side to having a check valve in a Naturally Aspirated (NA) application, and a check valve in required in boosted applications. The larger, higher flowing Pro Series Check Valve also has a hex nut on the body so you can disassemble it for inspection and cleaning.
UPR Billet One-Way Valve Cover Breather:
These are Valve Cover Breathers with a one-way valve inside of it. These are designed to allow excess/positive crankcase pressure to exit through the breather when in boost. Then it closes to return to vacuum while driving to prevent un-metered air from entering to maintain perfect drivability. These are also ideal for vehicles in very cold or freezing weather as it allows crankcase pressure to escape until condensation or frozen condensation in the PCV hoses melts or thaws. This is a must to ensure maximum engine seal life.
Replacement O-Rings:
Spare O-rings for the catch can cup. If the O-ring is lost, torn or if it's just time to replace it due to wear it's a good idea to have a couple of spares in the glove box.
THIS PART DOES NOT CARRY AN CARB EO NUMBER, AND THEREFORE IS FOR RACING / OFF ROAD USE ONLY. NOT FOR SALE OR USE IN CALIFORNIA DUE TO CARB/EMISSIONS. ALL CALIFORNIA ORDERS WILL BE CANCELLED AND REFUNDED
Product Features:
» Fender Mount Bracket
» 5/8" Billet Hose Ends (Black)
» 5/8" Plug N Play™ fittings
» Show Quality Machine Finish
» Billet Catch Can Size 2" x 5.75"
» Multi-Chamber Billet Catch Can
» 5/8" Continental INSTA»GRIP Braided Hose
» 5/8" Driver Side Braided Hose with Coalescing filter
» Large 6 ounce oil capacity holds the most oil in it's class
» Includes new mounting hardware for a complete installation
» Available in Satin or Black - Select Finish Above
» Clean Side Catch Can Upgrade Available - Select Can & Finish Above
» 5/8" Billet Hose Ends (Black)
» 5/8" Plug N Play™ fittings
» Show Quality Machine Finish
» Billet Catch Can Size 2" x 5.75"
» Multi-Chamber Billet Catch Can
» 5/8" Continental INSTA»GRIP Braided Hose
» 5/8" Driver Side Braided Hose with Coalescing filter
» Large 6 ounce oil capacity holds the most oil in it's class
» Includes new mounting hardware for a complete installation
» Available in Satin or Black - Select Finish Above
» Clean Side Catch Can Upgrade Available - Select Can & Finish Above
Fits These Vehicles:
2015 2016 2017 2018 2019 2020 Dodge Charger Challenger 6.2 Hellcat
Made in the USA!
Vehicle Fitment
x- Choosing a selection results in a full page refresh.