Description
x This 2015-2020 F150 Battery Tray mounted Catch Can kit is the perfect fit for your engine bay, with its extremely efficient compact design and incredible looking to top it off We went the extra mile to ensure you get the best quality components. This kit is 100% Modular and can be fully disassembled or emptied and cleaned in seconds. It utilizes UPR Braided Hose and Billet Hose Ends to give you the Strongest and Best Performing Setup for UPR's entry level Catch Can. No cheap stock lines here that have been cut and spliced on! Featuring UPR Plug N Play ™ Catch Can Fittings, you can empty the can without removing the intake cover or catch can lines from your engine. (Just simply unscrew the catch can bottom in seconds to empty it.) We have hundreds of hours testing our Multi-Stage Multi-Chamber Oil Separator's ensuring the results will exceed your expectations. We even have the largest oil capacity in for a compact highly efficient internal diffuser system. 4 ounces will give you the needed oil capacity to be sue the catch can does not overfill.
This new internal diffuser design provides exceptional Oil Control with it's ability to coalesce and condense better than every other competitor on the market as this is engineered properly. It cannot be compared or confused with units that have side by inlets and outlets with ineffective flimsy honeycomb filters or air compressor filters to keep the cost down and never take into account how critical the separation process is. At UPR make sure that this feature and process of the catch cans performance is protected with the best diffuser systems available. UPR's diffuser technology has consistently to capture and filter the most oil vapor and trash from getting into your air intake tract. This is the most critical feature of any catch can system. Manufactured from Domestic T-6 6061 Aluminum bar stock and finished off using only the best Diamond cutters to exceed your expectations of what a superior product should fit and look like.
Every UPR Catch Can is designed and tested USA product. UPR is the largest aftermarket catch can manufacturer in the country. Continually improving our designs to stay ahead of the competition and give you the cutting edge technology of tomorrow today. We are so confident we offer an unconditional warranty on our products to let you know you can always count on UPRproducts. We do not use plastic catch can fittings like the competition to ensure you will never have any cracks or failures that cheap plastic fittings suffer from.
Installs in 10-20 minutes.
UPR Billet Replacement O Rings
The O rings on the catch can will need to be replaced periodically. It is not a bad idea to have spares in the glove box just in case an O ring is lost or torn when servicing the catch can.
UPR Billet One-Way Valve Cover Breather:
These are Valve Cover Breathers with a one-way valve inside of it. These are designed to allow excess/positive crankcase pressure to exit through the breather when in boost. Then it closes to return to vacuum while driving to prevent un-metered air from entering to maintain perfect drivability. These are also ideal for vehicles in very cold or freezing weather as it allows crankcase pressure to escape until condensation or frozen condensation in the PCV hoses melts or thaws. This is a must to ensure maximum engine seal life.
The O rings on the catch can will need to be replaced periodically. It is not a bad idea to have spares in the glove box just in case an O ring is lost or torn when servicing the catch can.
UPR Billet One-Way Valve Cover Breather:
These are Valve Cover Breathers with a one-way valve inside of it. These are designed to allow excess/positive crankcase pressure to exit through the breather when in boost. Then it closes to return to vacuum while driving to prevent un-metered air from entering to maintain perfect drivability. These are also ideal for vehicles in very cold or freezing weather as it allows crankcase pressure to escape until condensation or frozen condensation in the PCV hoses melts or thaws. This is a must to ensure maximum engine seal life.
THIS PART DOES NOT CARRY AN CARB EO NUMBER, AND THEREFORE IS FOR RACING / OFF ROAD USE ONLY. NOT FOR SALE OR USE IN CALIFORNIA DUE TO CARB/EMISSIONS. ALL CALIFORNIA ORDERS WILL BE CANCELLED AND REFUNDED
Product Features:
» Show Quality Finish
» UPR Plug N Play ™ fittings
» UPR Plug N Play ™ fittings
» Prevents Oil from Entering Intake
» Exclusive Multi Stage Design Stops Oil
» Exclusive New Diffuser w/ New Drip Lip
» Exclusive Multi Stage Design Stops Oil
» Exclusive New Diffuser w/ New Drip Lip
» Can measures 2.25 x 3.5" 4oz. Capacity
» High Quality CNC Machined Billet Aluminum
» High Quality CNC Machined Billet Aluminum
» Improves Fuel Economy, Throttle Response & Performance
» 5/8" Oil Resistant Continental Braided Hose (No Cheap Rubber Hoses)
» High Quality Billet Aluminum Catch Can Fittings (No Cheap Plastic Fittings)
» Available in Satin Silver or Black - Select Finish Above
» Available in Satin Silver or Black - Select Finish Above
Fits These Vehicles:
2015 2016 2017 2018 2019 2020 Ford F-150 2.7
2011 2012 2013 2014 Ford Raptor 6.2
2015 2016 2017 2018 2019 2020 Ford Raptor 3.5
2015 2016 2017 2018 2019 2020 Ford F-150 3.5
2015 2016 2017 2018 2019 2020 Ford F-150 5.0 w/ Roush/Whipple Superchargers
2015 2016 2017 2018 2019 2020 Ford F-150 5.0 *DOES NOT FIT DIESEL F150*
Made in the USA!
Vehicle Fitment
x- Choosing a selection results in a full page refresh.