Description
x Get the ultimate oil separator for your 14-18 GM GMC Chevrolet Silverado Truck 5.3L with UPR Single Valve Plug N Play ™ Catch Can. This catch can kit has a much larger capacity, and UPR's Exclusive 4 Stage internal Design which makes it a huge improvement over our basic kit or any other manufacturer's kit! Offering the largest capacity in a compact design to be sure that it can eliminate oil vapors on vehicles that are normally aspirated or power added equipped. You can be sure that no other manufacturer can give you the level of quality or performance of a UPR Pro-Series Catch Can.
Manufactured from Domestic T-6 6061 Aluminum bar stock and finished off using only the best Diamond cutters to exceed your expectations of what a superior product should fit and look like.
UPR is the largest aftermarket catch can manufacturer in the country. Continually improving our designs to stay ahead of the competition and give you the cutting edge technology of tomorrow today. We are so confident we offer an unconditional warranty on our products to let you know you can always count on UPRproducts.
Manufactured from Domestic T-6 6061 Aluminum bar stock and finished off using only the best Diamond cutters to exceed your expectations of what a superior product should fit and look like.
UPR is the largest aftermarket catch can manufacturer in the country. Continually improving our designs to stay ahead of the competition and give you the cutting edge technology of tomorrow today. We are so confident we offer an unconditional warranty on our products to let you know you can always count on UPRproducts.
Installs in 30-45 minutes.
This UPR Pro Series catch can kit is shipped ready to install even if no upgrades are selected. Upgrades are available to allow you to tailor the kit to fit your needs. See the description below and select any upgrades from the drop down menus.
Upgrades available:
The Billet Pro Series check valve is a larger, higher flowing check valve than our standard check valve. It generally will increase the vacuum through the catch can and equate to better PCV evacuation. Better evacuation can translate to better MPG and low speed drivability. If you plan on adding a Supercharger or Turbo kit, this is recommended.
The Stainless Steel magnetic drain plug would replace the drain plug on the bottom of the catch can with an Allen head plug that has a magnet embedded into it. It will attract any ferrous metal material to it so the user can inspect it.
The drain line kit is our most popular drain option. It includes a drain valve, hose and fittings needed to install the drain valve. It allows the user to relocate the drain somewhere easier to access like the wheel well opening or bumper area. (You would choose either the Magnetic Drain Plug, or the Drain line kit - not both. If no drain option is selected, a standard plug will be installed)
The UPR catch cans have an O ring seal on the containment cup. Replacement O rings are available if you lose, drop, or tear an O ring when servicing the catch can. It's not a bad idea to have a spare set in the glove box.
The One-way crankcase breather is a breather with a one-way valve in it. It is easily installed by just replacing the oil fill cap. It allows excess crankcase pressure to exit through the breather when needed. It will close when crankcase pressure is normal, which keeps un metered air from entering. This is a great option for Supercharged or Turbocharged applications. The breather filter element is easily washable with just warm water and dish soap. It is also recommended for areas where below freezing temps are common. The breather will allow crank case pressure to escape until condensation or even frozen condensation in the hoses thaws.
THIS PART DOES NOT CARRY AN CARB EO NUMBER, AND THEREFORE IS FOR RACING / OFF ROAD USE ONLY. NOT FOR SALE OR USE IN CALIFORNIA DUE TO CARB/EMISSIONS. ALL CALIFORNIA ORDERS WILL BE CANCELLED AND REFUNDED
Product Features:
» 12oz Capacity
» Show Quality Finish
» Can measures 2.5" x 6"
» Show Quality Finish
» Can measures 2.5" x 6"
» Forged fittings & Drain Cock
» Prevents Oil from Entering Intake
» Exclusive 4 Stage Design Traps Oil
» High Quality CNC Machined Billet Aluminum
» Plug N Play ™ fittings at all Catch Can connections
» 3/8" Oil Resistant Continental Braided Hose included
» Improves Fuel Economy, Throttle Response & Performance
» Black Anodized Finish
» Prevents Oil from Entering Intake
» Exclusive 4 Stage Design Traps Oil
» High Quality CNC Machined Billet Aluminum
» Plug N Play ™ fittings at all Catch Can connections
» 3/8" Oil Resistant Continental Braided Hose included
» Improves Fuel Economy, Throttle Response & Performance
» Black Anodized Finish
Includes:
» Nickel Drain Cock
» Adjustable Mounting Bracket
» 3/8" Continental Braided Hoses
» Billet Hose Ends with Clamps
» Hi-Flo Billet Check Valves (1 PCS)
» Plug N Play ™ quick release connectors & billet fittings
» Single Valve Billet Catch Can (Exclusive 4 Stage Design)
» Adjustable Mounting Bracket
» 3/8" Continental Braided Hoses
» Billet Hose Ends with Clamps
» Hi-Flo Billet Check Valves (1 PCS)
» Plug N Play ™ quick release connectors & billet fittings
» Single Valve Billet Catch Can (Exclusive 4 Stage Design)
Fits These Vehicles:
2014 2015 2016 2017 2018 GM GMC Chevrolet Silverado 5.3L LS Trucks
Made in the USA!
Vehicle Fitment
x- Choosing a selection results in a full page refresh.