Plug N Play™ Billet Dual Inlet Breather Tank (fits 11-23 Mustang GT 5.0 or V6) UPR

     UPR Plug N Play™ Strut Tower Mount Breather Tank for the 2011 and newer 5.0L Mustang GT. or V6 Mustang.  Easily mounts to the shock tower tab and works with or without a strut tower brace. The new UPR clock able Bracket design allows the Breather Tank to be mounted in many positions to accommodate different fuel regulator and air intake combinations. It will also work well for Coyote Swap and 7.3 Godzilla swaps in other years and models! Designed to provide the best oil control without any questions. 100% CNC machined Oil Separator System provides the most sure fire way to eliminate any chances of oil getting into your inter-cooler and intake tract since there is no connection to intake vacuum or air inlet tubes.  Ideal for race cars or if you are running a Vortech, Paxton, Procharger, or Turbo kit with inlet screens only. This is the only complete ready to go no modifications needed Plug N Play™ Breather Tank System. Can be mounted on driver or passenger side strut tower. From the exact fit UPR Braided lines, Exclusive UPR Plug N Play™ fittings and UPR Quick Release Billet mounting bracket system. Giving you everything needed to protect your engine from any unwanted Blow-by.   UPR Breather tanks are easy to drain with either the provided petcock or you can unscrew the containment cup to drain, inspect and clean the contents out.  You can't do that with those over priced welded up breather tanks! 

Vent to Atmosphere breather tanks are for Racing / Off Road use only and do not comply with any emissions regulations. If you install this kit on a street driven vehicle you assume all liabilities for any emissions inspection fines or inspection denial. Additional tuning may be required.  If you are sensitive to odors, this may not be for you since crankcase fumes will be vented from the filter on the breather tank.

Installs in 30 minutes or less.

This UPR Pro Series catch can kit is shipped ready to install even if no upgrades are selected. Upgrades are available to allow you to tailor the kit to fit your needs.

Optional Parts:

UPR Adjustable Billet PCV Fitting:
The adjustable Billet PCV fitting includes 4 different size jets. It eliminates the failure prone factory PCV and still allows for the needed restriction. Jet sizes and application basics for Adjustable version are explained below.

» .100 Jet size is slightly more restrictive than the factory PCV fitting to allow you to restrict the PCV for vehicles ingesting too much oil through the PCV and wanting to reduce oil consumption.

» .125 Jet size is slightly less restrictive than the factory PCV fitting to allow you to adjust the pcv to increase flow a bit more than factory for vehicles that only need minor adjustments to eliminate vapor locking in the PCV system.

» .150 Jet size is even less restrictive for the boosted vehicles that tow and are driven harder to increase flow more than factory for vehicles that only need more adjustment to eliminate vapor locking in the PCV system.

» .175 Jet size is the least restrictive compared to the factory PCV fitting and allows for the largest adjustment of the jets for modified vehicles that generate a lot of blow-by / back pressure to eliminate vapor locking / flooding the clean side of the PCV system with oil.

Replacement Breather Filter:
Spare filter is a good thing to keep on hand. If original filter gets dirty and needs to be clean it can be swapped out and then cleaned at your convenience.

Replacement O-Rings:
Spare O-rings for the catch can cup. If the O-ring is lost, torn or if it's just time to replace it due to wear it's a good idea to have a couple of spares in the glove box.

THIS PART DOES NOT CARRY AN CARB EO NUMBER, AND THEREFORE IS FOR RACING / OFF ROAD USE ONLY.  NOT FOR SALE IN CALIFORNIA DUE TO CARB/EMISSIONS. ALL CALIFORNIA ORDERS WILL BE CANCELLED AND REFUNDED

Product Features:

» Show Quality Finish
» Easy 30 minute install
» Braided 5/8 Hoses and fittings
» Can measures 6.00" x 3.00"
» Vents oil vapor to a single tank
» Improves Fuel Economy & Performance
» High Quality CNC Machined Billet Aluminum
» Designed to be a complete Plug N Play™ System for the S550
» Available in Satin Silver or Black - Select Finish Above

Fits These Vehicles:

2015 2016 2017 2018 2019 2020 2021 Mustang 5.0 S550 GT and V6 Models .  *For 11-14 coyote with ON3 Twin Turbo kit, Use part number 5029-206

Made in the USA!