FREE Ground Shipping * On Orders over $99 on UPR manufactured parts
Order Hotline
561-588-6630
Free Ground Shipping on UPR Manufactured Products (orders over $99)
Free Ground Shipping on UPR Manufactured products within the 48 Contiguous United States. Order subtotal must meet or exceed $99 in order to qualify for this free shipping offer.
UPR Ball Joint spacers allow the use of an SN95 spindle with an 79-93 Mustang ball joint. The SN spindle is shorter so the castle nut will bottom out on the threads before fully seating on the spindle. By using these spacers between the nut and the spindle, it will allow the spindle to fully seat and for the castle nut to be tightened as well as line up the cotter pin. Also works with aftermarket spindles that are short like the SN95 spindle.
» 2pc Kit
» Silver Zinc Plated Finish
» Spaces Castle Nut in proper position
» Perfect use with SN95 spindle with a fox body ball joint.
Installs in 10 minutes or less.
1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 Ford Mustang LX GT GTS 4.6 5.0 5.8 281 302 351 Cobra Bullitt Mach 1
Not thick enough, and inner diameter is too large. The one I received has an inner diameter or .80 and a thickness of .224. When castle nut is fully tightened the pin hole is still above the top of nut. Spacer has way to much slop and nut tries to embed into inner edge of spacer.
Get the latest updates on new products and upcoming sales.
Thanks for subscribing!
This email has been registered!