Home > 96-98 Mustang GT & V6 > 96-98 Mustang Suspension > Suspension Packages > 79-04 Mustang 4.6 LS1 Swap Chrome Moly K Member Kit

79-04 Mustang 4.6 LS1 Swap Chrome Moly K Member Kit Solid


Suspension Packages
79-04 Mustang 4.6 LS1 Swap Chrome Moly K Member Kit

     UPR's all new complete LS1 Swap Chrome Moly K-member Kit - will save more weight and exceed any strength limitations of mild steel while allowing maximum header and oil pan clearance. This kit was designed for the abuse of hardcore drag race, road race, and Street Enthusiasts. Most importantly it will handle the everyday wear and tear of city & highway streets like that was it's main intent. Includes LS1 swap adapter plates that allow you to bolt them to any standard LS1, 5.3L, 6.0L block and then bolt a 4.6 Mustang Motor Mount to it and use UPRs 4.6 Chrome Moly K-member. This is the Lightest and Strongest package on the Market for LS1 Mustang swaps. Clears Dynatech 715-91310 Longtube headers in 94-04 cars. Includes UPR Coil Over Kit with exclusive designed adjuster nut with new set screw to ensure it never looses it's setting! Also requires no tools to adjust ride height. UPR Recommends the purchase of a bump steer kit with this product. Caster Camber plates are required due to the added stress on the strut tower. All of our Suspension Products are made with the Highest Quality materials and most expensive components. We spare no expense on our products and always stand behind them with our Lifetime warranty that no one else offers.
Product Features
Does NOT Alter Wheelbase
Silver Powder Coated Finish
Thicker 1/4" Motor Mount Pads
Tig Welded in Billet fixtures
4130 Seamless Chrome Moly Tubing
Save 70lbs over stock K-member & A arms
All Welding & Materials Made in the USA!
Lightest and Strongest LS1 Mustang Swap K-member
Includes LS1 Adapter Plate and 4.6 Solid or Urethane Motor Mounts
Now includes Rack Bolts & Offset or Standard Rack Bushings
Installation:
Installs in 3-6 hours.
1 - Chrome Moly Tubular K-member Silver Powder Coated
2 - Chrome Moly Tubular A-arms Silver Powder Coated
1 - Front Coil Over Kit with Coil Over Springs of your choice
1 - LS1 Adapter Plate Kit.
1 - 4.6 Solid or Urethane Motor Mount Kit. If using after market motor mounts the locating tab may have to be trimmed. Must re-use factory hardware. Fitment:
1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 LX GT GTS Mustang Cobra Shelby Roush Saleen & Steeda Vehicles. No one else can stack up to the bold clean styling of our aftermarket Billet dress ups, Street Strip & Racing Suspension & Performance Parts for your late model American Muscle Car! Made In USA


http://www.uprproducts.com/mustang-pro-series-chrome-moly-k-member-kit-96-ls1-solid.html
$849.99
click image to enlarge
Regular price$849.99
Item #2005-96K-106In stock
AvailabilityUsually ships the same business day
Select Motor Mount & A arms:
Select Spring Rate:
Select Rack Bushings (Included):
Add Hardware Upgrade Kit?:
Add Tow Hooks?:
Add Oil Pan Savers?:
Add Bumpsteer Kit?:
Rating:
Quantity


  • Description
  • Reviews
  • Q & A

     UPR's all new complete LS1 Swap Chrome Moly K-member Kit - will save more weight and exceed any strength limitations of mild steel while allowing maximum header and oil pan clearance. This kit was designed for the abuse of hardcore drag race, road race, and Street Enthusiasts. Most importantly it will handle the everyday wear and tear of city & highway streets like that was it's main intent.

Includes LS1 swap adapter plates that allow you to bolt them to any standard LS1, 5.3L, 6.0L block and then bolt a 4.6 Mustang Motor Mount to it and use UPRs 4.6 Chrome Moly K-member. This is the Lightest and Strongest package on the Market for LS1 Mustang swaps. Clears Dynatech 715-91310 Longtube headers in 94-04 cars.

Includes UPR Coil Over Kit with exclusive designed adjuster nut with new set screw to ensure it never looses it's setting! Also requires no tools to adjust ride height.

UPR Recommends the purchase of a bump steer kit with this product. Caster Camber plates are required due to the added stress on the strut tower.

All of our Suspension Products are made with the Highest Quality materials and most expensive components. We spare no expense on our products and always stand behind them with our Lifetime warranty that no one else offers.


Product Features


Does NOT Alter Wheelbase
Silver Powder Coated Finish
Thicker 1/4" Motor Mount Pads
Tig Welded in Billet fixtures
4130 Seamless Chrome Moly Tubing
Save 70lbs over stock K-member & A arms
All Welding & Materials Made in the USA!
Lightest and Strongest LS1 Mustang Swap K-member
Includes LS1 Adapter Plate and 4.6 Solid or Urethane Motor Mounts
Now includes Rack Bolts & Offset or Standard Rack Bushings


Installation:


Installs in 3-6 hours.


1 - Chrome Moly Tubular K-member Silver Powder Coated
2 - Chrome Moly Tubular A-arms Silver Powder Coated
1 - Front Coil Over Kit with Coil Over Springs of your choice
1 - LS1 Adapter Plate Kit.
1 - 4.6 Solid or Urethane Motor Mount Kit.

If using after market motor mounts the locating tab may have to be trimmed. Must re-use factory hardware.

Fitment:


1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 LX GT GTS Mustang Cobra Shelby Roush Saleen & Steeda Vehicles.

No one else can stack up to the bold clean styling of our aftermarket Billet dress ups, Street Strip & Racing Suspension & Performance Parts for your late model American Muscle Car!

Made In USA

Question: Does this K-member move the tires forward or backward like others?

Answer: No it retains the factory wheelbase and places the wheels in the factory location.



Back To Top
Submit Your Own PhotoClose
Product Images
Customer Photos ()