{"title":"UPR Anti Roll Bars","description":"\u003ch1 class=\"collection-h1\"\u003eAnti Roll Bars\u003c\/h1\u003e\n\u003cp class=\"collection-text\"\u003eThe UPR Products anti-roll bar is built for the drag strip. When a high-horsepower Mustang leaves the line hard, driveshaft torque tries to rotate the chassis — forcing the passenger-side rear tire down, lifting the driver-side front, and pushing the car toward the wall. A UPR ARB transfers that rotational energy into both rear tires at once, keeping the chassis square and both contact patches working from launch to finish line.\u003c\/p\u003e\n\u003cp class=\"collection-text\"\u003eEvery bar is TIG-welded in billet steel fixtures from 1¼\" chromoly bar stock. Pro-Series™ kits run a solid bar with roller bearing ends for the most direct chassis response — designed for drag race use only. Pro Street kits use a hollow-wall bar with urethane bushings and billet aluminum mounts, bridging the gap between a stock replacement bar and a full race setup for the street-driven, track-day Mustang. Double-bar kits step up the hardware for cars chasing 8-second quarter miles and quicker. Fitments cover Fox Body, SN95, and S197 Mustangs.\u003c\/p\u003e\n\u003cp class=\"collection-text\"\u003eComplete your traction package with UPR \u003ca href=\"https:\/\/www.uprproducts.com\/collections\/control-arms\"\u003erear control arms\u003c\/a\u003e, spherical bushings, and the full \u003ca href=\"https:\/\/www.uprproducts.com\/collections\/upr-pro-series-suspension\"\u003ePro-Series suspension\u003c\/a\u003e lineup.\u003c\/p\u003e","products":[{"product_id":"05-14-mustang-pro-street-anti-roll-bar-kit","title":"Pro Street Anti Roll Bar Kit (fits 05-14 Mustang) UPR","description":"\u003cdiv class=\"caption-display\"\u003e     UPR's all new Pro Street Anti-Roll Bar kit for all 05-14 Ford Mustang's eliminates body roll, stabilizes the car and improves the consistency going down the track and on the street. Bolt in mount uses all existing factory locations. Clears the factory and\/or aftermarket exhaust and suspension components. Can be used at the track and on the street.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003eInstalls in 2 hours, welding of axle mounting tabs is required.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003ch2 class=\"caption-display\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e» Grade 8 Hardware Included\u003cbr\u003e» Welding of Tabs is Required\u003cbr\u003e» Tig Welded in Billet Steel Fixtures\u003cbr\u003e» Double Adjustable Sway Bar links\u003cbr\u003e» 1 1\/4\" Solid Bar \u0026amp; Machined Arms\u003cbr\u003e» Energy Suspension Sway Bar Bushings\u003cbr\u003e» Eliminates Body Roll \u0026amp; Stabilizes the car\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch2 class=\"caption-display\"\u003e\u003cstrong\u003eFits These Vehicles:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 5.0L 4.6L 5.4L 5.8L GT Bullitt GT500 Mustang Shelby Roush Saleen \u0026amp; Vehicles.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003cstrong\u003eMade in the USA!\u003c\/strong\u003e\u003c\/div\u003e","brand":"UPR Products","offers":[{"title":"Default Title","offer_id":45195843567793,"sku":"2000-04","price":479.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/3307\/8705\/files\/2000-04-ok__75069.1680197462.1280.1280.jpg?v=1775490799"},{"product_id":"79-04-mustang-pro-series-rear-suspension-kit","title":"Pro-Series™ Rear Suspension Kit (fits 79-04 Mustang) UPR","description":"\u003cdiv class=\"caption-display\"\u003e\n\u003cdiv class=\"caption-display\"\u003e     Lower control arms feature 4130 Chrome Moly .083 wall thickness seamless tubing CNC machined and tig welded in Billet Steel Fixtures for a perfect fit every time. 7075 billet aluminum bushings and high strength performance alloy rod ends. Upper control arms feature Chrome Moly Formed boxes that have been revised with a gusset to eliminate any flex or unwanted distortion from Ultra High Horsepower Mustangs. The 4130 Chrome-Moly threaded adjuster system allows these bars to be fully in car adjustable on the fly or between rounds in the lanes. Setting your pinion angle just got so much easier that it can be done in just minutes.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003c\/div\u003e\n\u003cbr\u003e\n\u003cdiv class=\"caption-display\"\u003eAll parts are Fully CNC machined and Tig welded in billet steel fixtures to ensure a perfect fit. Our Silver Zinc Plating will withstand the Elements \u0026amp; Resistant Corrosion. Last but not least is our 7075 billet aluminum bushings and high strength performance alloy. *Anti-Roll bar will NOT work with stock tailpipes!\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003c\/div\u003e\u003cbr\u003e\n\u003ch2 class=\"caption-display\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e» Silver Zinc and Silver Powder Coat Finish\u003cbr\u003e» 4130 Chrome Moly Seamless Tubing (Lower Control Arms)\u003cbr\u003e» Manufactured from Indestructible Heat Treated Steel\u003cbr\u003e» Upper and Lower Control Arms fully Tig Welded in Billet Steel Fixtures\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003ch2 class=\"caption-display\"\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eIncludes:\u003c\/span\u003e \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e1. Chrome Moly Adjustable Race Lower control arms\u003cbr\u003e2. Chrome Moly Double Adjustable race upper control arms\u003cbr\u003e3. Anti-Roll Bar with roller bearings*\u003cbr\u003e4. 7075 Billet Spherical housing bushing kit\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003c\/div\u003e\u003cbr\u003e\n\u003ch2 class=\"caption-display\"\u003e\u003cstrong\u003eFits These Vehicles:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 LX GT GTS Mustang Cobra* Roush Saleen \u0026amp; Vehicles.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e* Will not work with IRS equipped vehicles.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class='tab-3\"'\u003e\u003cstrong\u003eMade in the USA!\u003c\/strong\u003e\u003c\/div\u003e","brand":"UPR Products","offers":[{"title":"Rear Suspension fits 1979-1998 Mustang","offer_id":46673078223025,"sku":"1999-K","price":735.99,"currency_code":"USD","in_stock":true},{"title":"Rear Suspension fits 1999-2004 Mustang","offer_id":46673078255793,"sku":"1999-K-99","price":735.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/3307\/8705\/files\/1999-K__67510.1587751894.1280.1280.jpg?v=1775490603"},{"product_id":"79-04-ford-mustang-anti-roll-bar-adjustable-linkage","title":"Anti Roll Bar Adjustable Linkage (fits 79-04 Ford Mustang) UPR","description":"\u003cdiv class=\"caption-display\"\u003e     Replacement UPR Anti Roll Bar Adjustable Linkage Bars with Heim joints that fit all 79-04 Mustang kits.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003eInstalls in 30 minutes, welding is required if replacing the tabs.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"caption-display\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e» Weld on Tabs\u003cbr\u003e» Includes Mounting Hardware\u003cbr\u003e» Aluminum linkage bars \u0026amp; Hiems\u003cbr\u003e» Fits 79-04 Mustang UPR Anti Roll Bars\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e» The center to center length is 5.75 inch closed\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003ch2 class=\"caption-display\"\u003e\u003cstrong\u003eFits These Vehicles:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003* 2004* LX GT GTS Mustang Mach 1 Bullitt Cobra Shelby Roush Saleen \u0026amp; Vehicles.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e* Does not work on cars with IRS.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003cstrong\u003eMade in the USA!\u003c\/strong\u003e\u003c\/div\u003e","brand":"UPR Products","offers":[{"title":"Default Title","offer_id":45108554039473,"sku":"2026-02","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/3307\/8705\/files\/79-04-ford-mustang-anti-roll-bar-adjustable-linkage-3__46131.1511302077.1280.1280.jpg?v=1775487931"},{"product_id":"05-14-mustang-pro-series-chrome-moly-anti-roll-bar-kit","title":"Pro-Series™ Chrome Moly Anti Roll Bar Kit (fits 05-14 Mustang) UPR","description":"\u003cdiv class=\"caption-display\"\u003e     The UPR Anti-Roll Bar is part of the \u003cspan style=\"font-family: serpentinedbol;\"\u003ePro-Series\u003c\/span\u003e ™ Suspension Kit used by all our racers in eliminating body roll and stabilizing the car down the track. Our Anti Roll Bar features spherical bearings and solid 1 1\/4\" bar to ensure the smoothest reacting kit available! Fully welded in a Billet Steel Fixture for a perfect fit. Bearing mounting plates are welded into the car and bearing cups bolt in allowing for removal of the anti roll bar. Does not work with stock tailpipes. Anti-roll bar is designed for drag race use only. Links must be disconnected while driving on street to prevent damage.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eInstalls in 2-3 hours, welding is required and mounting hardware is included.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"caption-display\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e» Welding Required\u003cbr\u003e» Spherical Bearing Ends\u003cbr\u003e» Bar is Silver Zinc Plated\u003cbr\u003e» Grade 8 Hardware Included\u003cbr\u003e» 1 1\/4\" Solid Bar \u0026amp; Machined Arms\u003cbr\u003e» Tig Welded in Billet Steel Fixtures\u003cbr\u003e» Eliminates Body Roll \u0026amp; Stabilizes the car\u003cbr\u003e» Bolt in Bearing Cups so Bearings can be serviced\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"caption-display\"\u003e\n\u003cstrong\u003eFits These Vehicles:\u003c\/strong\u003e \u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 GT Bullitt GT500 Mustang Cobra Shelby Roush Saleen \u0026amp; Vehicles.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\n\u003cstrong\u003eMade in the USA!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class='tab-3\"'\u003e\n\u003cp class=\"tab-title\"\u003e\u003cstrong\u003eQ \u0026amp; A\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"tab-content\"\u003e\n\u003cstrong\u003eQuestion:\u003c\/strong\u003e Why do I need an anti roll bar? \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAnswer:\u003c\/strong\u003e The factory sway bar has rubber bushings and will only limit body roll to a certain point. You will end up with body roll and the car will feel loose going down the track. The anti roll bar will keep the rear end square to the body and make the car more stable going down the track.\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\n\u003cbr\u003e\u003cstrong\u003eQuestion:\u003c\/strong\u003e How do you set an anti roll bar once it's installed? \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAnswer:\u003c\/strong\u003e This will take two people to accomplish. First you want the car at race weight just like it will go down the track with fuel, driver in the seat, etc... Next adjust the links so there is 2-3\" of space between the top of the arms on the bar and the floor. Last step you will set the passenger side link to neutral, so there is no tension on it and you can slide the bolt in and out of the end links.\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"UPR Products","offers":[{"title":"Default Title","offer_id":45108560298161,"sku":"2000-02","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/3307\/8705\/files\/yhst-37354654005614_2270_125341570__95210.1511302012.1280.1280.jpg?v=1775487819"},{"product_id":"79-04-ford-mustang-anti-roll-bar-bearing-cups","title":"Anti Roll Bar Bearing Cups (fits 79-04 Ford Mustang) UPR","description":"\u003cdiv class=\"caption-display\"\u003e     Replacement UPR Anti Roll Bar Bearing Cups with needle roller bearings that fit all 79-04 Mustang kits.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003eInstalls in 1-2 hours, welding is required.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"caption-display\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e» Welding Required\u003cbr\u003e» Roller Bearing Ends\u003cbr\u003e» Fits 79-04 Mustang UPR Anti Roll Bars\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"caption-display\"\u003e\n\u003cstrong\u003eFits These Vehicles:\u003c\/strong\u003e \u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003* 2004* LX GT GTS Mustang Mach 1 Bullitt Cobra Shelby Roush Saleen \u0026amp; Vehicles.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e* Does not work on cars with IRS.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\n\u003cstrong\u003e Made in the USA!\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e","brand":"UPR Products","offers":[{"title":"Default Title","offer_id":45134460846257,"sku":"2026-01","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/3307\/8705\/files\/79-04-ford-mustang-anti-roll-bar-bearing-cups-3__35818.1511302024.1280.1280.jpg?v=1775486007"},{"product_id":"05-14-mustang-adjustable-front-sway-bar-end-links","title":"Adjustable Front Sway Bar End Links Stock Height(fits 05-14 Mustang) UPR","description":"\u003cdiv class=\"caption-display\"\u003e\n\u003cdiv class=\"caption-display\"\u003e     Adjust your front sway bar with confidence with these new Race Adjustable Billet Sway Bar End Links for your 2005-2014 Mustang stock to 1.5\" Lowered. Double adjustable for easy on the car adjustment and Teflon lined rod ends eliminate all slop the factory end links allow.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003eCNC Machined from 6061 Billet Aluminum and includes Teflon lined rod ends for ultimate durability.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch2 class=\"caption-display\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/h2\u003e\n» Billet Race Adjustable Sway Bar End Links\u003cbr\u003e» CNC Machined 6061 Billet Aluminum\u003cbr\u003e» 9.5\" Closed and 11.5\" Open\u003cbr\u003e» Teflon lined Rod Ends\u003cbr\u003e» Double Adjustable\u003cbr\u003e» Brushed Satin Finish\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003ch2 class=\"caption-display\"\u003e\u003cstrong\u003eFits These Vehicles:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Mustang 4.6L 5.4L 5.0L 4V 3V V6 V8 GT GT500 Shelby Saleen and Roush Vehicles.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\n\u003cstrong\u003eMade in the USA!\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e","brand":"UPR Products","offers":[{"title":"Default Title","offer_id":45134504788145,"sku":"2011-01","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/3307\/8705\/files\/2011-01.jpg?v=1775485653"},{"product_id":"79-04-mustang-pro-series-anti-roll-bar-kit-for-tailpipes","title":"Pro-Series™ Anti Roll Bar Kit for Tailpipes (fits 79-04 Mustang) UPR","description":"\u003cdiv class=\"caption-display\"\u003e     The UPR \u003cspan style=\"font-family: serpentinedbol;\"\u003ePro-Series\u003c\/span\u003e™ Anti-Roll Bar Kit for Tailpipes is part of the \u003cspan style=\"font-family: serpentinedbol;\"\u003ePro-Series\u003c\/span\u003e™ Suspension line used by all our racers in eliminating body roll and stabilizing the car down the track. Our Anti Roll Bar features roller bearings and solid 1 1\/4\" bar to ensure the smoothest reacting kit available! Bar assembly is welded to allow clearance for factory or factory style 2 1\/2\" tailpipes. Anti-roll bar is designed for drag race use only. Links must be disconnected while driving on street to prevent damage.\u003c\/div\u003e\n\u003cp\u003eInstalls in 2-3 hours, welding is required and mounting hardware is included.\u003c\/p\u003e\n\u003ch2 class=\"caption-display\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e» 1 1\/4\" Solid Bar\u003cbr\u003e» Welding Required\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e» Roller Bearing Ends\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e» Installs in 2-3 Hours\u003cbr\u003e» Bar comes Zinc Plated\u003cbr\u003e» Tig Welded in Billet Steel Fixtures\u003cbr\u003e» Designed to be installed with Tail Pipes\u003cbr\u003e» Eliminates Body Roll \u0026amp; Stabilizes the car\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003ch2\u003e\u003cstrong\u003eFits These Vehicles:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 LX GT GTS Mustang Mach 1 Bullitt Cobra* Shelby Roush Saleen \u0026amp; Vehicles.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e* Does not work on cars with IRS.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA!\u003c\/strong\u003e\u003c\/p\u003e","brand":"UPR Products","offers":[{"title":"Default Title","offer_id":45134703100081,"sku":"2000-05","price":284.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/3307\/8705\/files\/79-04-mustang-pro-series-anti-roll-bar-kit-for-tailpipes-3__66835.1511302008.1280.1280.jpg?v=1775482940"},{"product_id":"79-04-mustang-pro-series-chrome-moly-anti-roll-bar-kit-weld-to-fit","title":"Pro-Series™ Chrome Moly Anti Roll Bar Kit Weld to Fit (fits 79-04 Mustang) UPR","description":"\u003cdiv class=\"caption-display\"\u003e     The UPR \u003cspan style=\"font-family: serpentinedbol;\"\u003ePro-Series\u003c\/span\u003e ™Anti-Roll Bar Kit Weld to Fit is part of the \u003cspan style=\"font-family: serpentinedbol;\"\u003ePro-Series\u003c\/span\u003e ™ Suspension line used by all our racers in eliminating body roll and stabilizing the car down the track. Our Anti Roll Bar features roller bearings and solid 1 1\/4\" bar to ensure the smoothest reacting kit available! Bar assembly comes partially finished so that it can be installed around tailpipes. Finish welded is required. Anti-roll bar is designed for drag race use only. Links must be disconnected while driving on street to prevent damage.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003eInstalls in 2-3 hours, welding is required and mounting hardware is included.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e» 1 1\/4\" Solid Bar\u003cbr\u003e» Welding Required\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e» Roller Bearing Ends\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e» Installs in 2-3 Hours\u003cbr\u003e» Bar comes un-plated\u003cbr\u003e» Tig Welded in Billet Steel Fixtures\u003cbr\u003e» Eliminates Body Roll \u0026amp; Stabilizes the car\u003cbr\u003e» Designed to be installed with any style Tail Pipe\u003cbr\u003e» Anti-Roll Bar Arms are un-welded so you can set the ideal location for your exhaust\u003cbr\u003e» Available in Single or Double Anti Roll Bar configuration - Select Above\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003c\/div\u003e\u003cbr\u003e\n\u003ch2\u003e\u003cstrong\u003eFits These Vehicles:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 LX GT GTS Mustang Mach 1 Bullitt Cobra* Shelby Roush Saleen \u0026amp; Vehicles.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e* Does not work on cars with IRS.\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ \u0026amp; A\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"caption-display\"\u003e\n\u003cstrong\u003eQuestion:\u003c\/strong\u003e Why do I need an anti roll bar?\u003cbr\u003e\u003cstrong\u003eAnswer:\u003c\/strong\u003e The factory sway bar has rubber bushings and will only limit body roll to a certain point. You will end up with body roll and the car will feel loose going down the track. The anti roll bar will keep the rear end square to the body and make the car more stable going down the track.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eQuestion:\u003c\/strong\u003e How do I know if I need a single or double Anti Roll bar?\u003cbr\u003e\u003cstrong\u003eAnswer:\u003c\/strong\u003e We recommend the double anti roll bar when customers are making over 800 HP or running 5 second 1\/8 mile or 8 second 1\/4 mile times.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eQuestion:\u003c\/strong\u003e How do you set an anti roll bar once it's installed?\u003cbr\u003e\u003cstrong\u003eAnswer:\u003c\/strong\u003e This will take two people to accomplish. First you want the car at race weight just like it will go down the track with fuel, driver in the seat, etc... Next adjust the links so there is 2-3\" of space between the top of the arms on the bar and the floor. Last step you will set the passenger side link to neutral, so there is no tension on it and you can slide the bolt in and out of the end links.\n\u003c\/div\u003e","brand":"UPR Products","offers":[{"title":"Single Unwelded Anti Roll Bar","offer_id":46670619312305,"sku":"2000-03","price":274.99,"currency_code":"USD","in_stock":true},{"title":"Double Unwelded Anti Roll Bar","offer_id":46670619345073,"sku":"2000-06","price":364.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/3307\/8705\/files\/yhst-37354654005614_2269_64621019__29074.1511302100.1280.1280.jpg?v=1775482581"},{"product_id":"79-04-mustang-pro-extreme-duty-rear-suspension-kit","title":"Extreme Duty Rear Suspension Kit (fits 79-04 Mustang) UPR","description":"\u003cdiv class=\"caption-display\"\u003e\n\u003cdiv class=\"caption-display\"\u003e     Lower control arms feature 4130 Chrome Moly .083 wall thickness seamless tubing CNC machined and tig welded in Billet Steel Fixtures for a perfect fit every time. 7075 billet aluminum bushings and high strength performance alloy rod ends. Upper control arms feature Chrome Moly Formed boxes that have been revised with a gusset to eliminate any flex or unwanted distortion from Ultra High Horsepower Mustangs. The 4130 Chrome-Moly threaded adjuster system allows these bars to be fully in car adjustable on the fly or between rounds in the lanes. Setting your pinion angle just got so much easier that it can be done in just minutes.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003c\/div\u003e\n\u003cbr\u003e\n\u003cdiv class=\"caption-display\"\u003eAll parts are Fully CNC machined and Tig welded in billet steel fixtures to ensure a perfect fit. Our Silver Zinc Plating will withstand the Elements \u0026amp; Resistant Corrosion. Last but not least both upper and lower control arms have all grade 8 hardware, heat treated steel bushings sleeves and oversized heavy duty heim joints. *Anti-Roll bar will NOT work with stock tailpipes!\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch2 class=\"caption-display\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e» Silver Zinc and Silver Powder Coat Finish\u003cbr\u003e» 4130 Chrome Moly Seamless Tubing (Lower Control Arms)\u003cbr\u003e» Manufactured from Indestructible Heat Treated Steel\u003cbr\u003e» Grade 8 Hardware for Upper and Lower Control Arms\u003cbr\u003e» Larger Heim Joints and Heat Treated Steel Bushing Sleeves (Upper and Lower Control Arms)\u003cbr\u003e» Upper and Lower Control Arms fully Tig Welded in Billet Steel Fixtures\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003ch2 class=\"caption-display\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e1. Chrome Moly Adjustable Extreme Race Lower Control Arms\u003cbr\u003e2. Chrome Moly Double Adjustable Extreme Race Upper Control Arms\u003cbr\u003e3. Double Anti-Roll Bar with roller bearings*\u003cbr\u003e4. 7075 Billet Spherical housing bushing kit\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003ch2 class=\"caption-display\"\u003e\u003cstrong\u003eFits These Vehicles:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e\n\u003cspan style=\"color: #ff0000;\"\u003e\u003c\/span\u003e1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 LX GT GTS Mustang Cobra* Shelby Roush Saleen \u0026amp; Vehicles.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e* Will not work on IRS equipped vehicles.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003c\/div\u003e\n\u003cp class='tab-3\"'\u003e\u003cstrong\u003eMade in the USA!\u003c\/strong\u003e\u003c\/p\u003e","brand":"UPR Products","offers":[{"title":"Extreme Duty Rear Suspension Kit fits 1979-1998 Mustang","offer_id":46669222903985,"sku":"1999-K-R","price":899.99,"currency_code":"USD","in_stock":true},{"title":"Extreme Duty Rear Suspension Kit fits 1999-2004 Mustang","offer_id":46669222936753,"sku":"1999-K-R-99","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/3307\/8705\/files\/yhst-37354654005614_2268_126138162__51212.1511302135.1280.1280.gif?v=1775481021"},{"product_id":"05-14-ford-mustang-sway-bar-eliminator","title":"Sway Bar Eliminator Front (fits 05-14 Ford Mustang)","description":"\u003cdiv class=\"caption-display\"\u003e* Fits 2005-12 Mustang GT\u003cbr\u003e * Lightens front end\u003cbr\u003e * Improves weight transfer \u0026amp; traction\u003cbr\u003e * Dramatically improves 60 ft. times\u003cbr\u003e * Recommended for racing only\u003cbr\u003e * HD tubular steel w\/precision welds\u003cbr\u003e * Includes all necessary hardware\u003cbr\u003e * Installs in approximately 1-hour using basic hand tools\u003cbr\u003e * Durable Blue powder coated finish\u003c\/div\u003e\r\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\r\n\u003cdiv class=\"caption-display\"\u003e\n\u003cspan style=\"color: #ff0000;\"\u003eQuality Construction:\u003c\/span\u003e \u003c\/div\u003e\r\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\r\n\u003cdiv class=\"caption-display\"\u003eInstalls in 1 hour or less.\u003c\/div\u003e\r\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\r\n\u003cdiv class=\"caption-display\"\u003e\n\u003cspan style=\"color: #ff0000;\"\u003eFits these Vehicles:\u003c\/span\u003e 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 V8 GT Coyote 5.0L 4.6L Mustang Roush \u0026amp; Saleen Vehicles.\u003c\/div\u003e","brand":"Granatelli","offers":[{"title":"Default Title","offer_id":45135236628657,"sku":"GMS-2025-01","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/3307\/8705\/files\/yhst-37354654005614_2271_86015924__13159.1511302065.1280.1280.jpg?v=1775480979"},{"product_id":"79-04-mustang-pro-series-chrome-moly-double-anti-roll-bar-kit","title":"Pro-Series™ Chrome Moly Double Anti Roll Bar Kit (fits 79-04 Mustang) UPR","description":"\u003cdiv class=\"caption-display\"\u003e     The UPR Double Anti-Roll Bar is part of the \u003cspan style=\"font-family: serpentinedbol;\"\u003ePro-Series\u003c\/span\u003e ™ Suspension Kit used by all our racers in eliminating body roll and stabilizing the car down the track. Our Anti Roll Bar features roller bearings and solid 1 1\/4\" bar to ensure the smoothest reacting kit available! Fully welded in a Billet Steel Fixture for a perfect fit. Designed for cars running 8 second quarter mile (5 second eighth mile) or faster our Double Arm Anti Roll Bar is the way to keep your tires planted while lowering your 60 foot times. Does not work with stock tailpipes. Anti-roll bar is designed for drag race use only. Links must be disconnected while driving on street to prevent damage.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003eInstalls in 2-3 hours, welding is required and mounting hardware is included.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e» 1 1\/4\" Solid Bar\u003cbr\u003e» Welding Required\u003cbr\u003e» Roller Bearing Ends\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e» Installs in 2-3 Hours\u003cbr\u003e» Bar is Silver Zinc Plated\u003cbr\u003e» Tig Welded in Billet Steel Fixtures\u003cbr\u003e» Eliminates Body Roll \u0026amp; Stabilizes the car\u003cbr\u003e» Double Arm Design for Higher HP Applications\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cstrong\u003eFits These Vehicles:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 LX GT GTS Mustang Mach 1 Bullitt Cobra Shelby Roush Saleen \u0026amp; Vehicles.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003eDoes not work on cars with IRS.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class='tab-3\"'\u003e\n\u003cp class=\"tab-title\"\u003e\u003cstrong\u003eQ \u0026amp; A\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"tab-content\"\u003e\n\u003cstrong\u003eQuestion:\u003c\/strong\u003e Why do I need an anti roll bar? \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAnswer:\u003c\/strong\u003e The factory sway bar has rubber bushings and will only limit body roll to a certain point. You will end up with body roll and the car will feel loose going down the track. The anti roll bar will keep the rear end square to the body and make the car more stable going down the track.\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\n\u003cbr\u003e\u003cstrong\u003eQuestion:\u003c\/strong\u003e How do I know if I need a single or double Anti Roll bar? \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAnswer:\u003c\/strong\u003e We recommend the double anti roll bar when customers are making over 800 HP or running 5 second 1\/8 mile or 8 second 1\/4 mile times.\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\n\u003cbr\u003e\u003cstrong\u003eQuestion:\u003c\/strong\u003e How do you set an anti roll bar once it's installed? \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAnswer:\u003c\/strong\u003e This will take two people to accomplish. First you want the car at race weight just like it will go down the track with fuel, driver in the seat, etc... Next adjust the links so there is 2-3\" of space between the top of the arms on the bar and the floor. Last step you will set the passenger side link to neutral, so there is no tension on it and you can slide the bolt in and out of the end links.\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"UPR Products","offers":[{"title":"Default Title","offer_id":45135319105713,"sku":"2000-01-R","price":384.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/3307\/8705\/files\/yhst-37354654005614_2268_116297424__03664.1511302008.1280.1280.gif?v=1775485179"},{"product_id":"79-04-mustang-double-arb-wishbone-insane-horsepower-kit","title":"Double ARB \u0026 Wishbone Insane Horsepower Kit (fits 79-04 Mustang) UPR","description":"\u003cdiv class=\"caption-display\"\u003e     The UPR Double Anti-Roll Bar and Wishbone high horsepower package brings together two of our most popular parts for high HP cars in one kit. The Wishbone maintains rear end positioning and withstands Extreme HP Load or Tire Shake while the Double Anti Roll bar eliminates body roll and stabilizes the car down the track.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003eInstalls in 5-6 hours, welding is required and mounting hardware is included.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e\n\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eDouble Anti Roll Bar Features\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e» 1 1\/4\" Solid Bar\u003cbr\u003e» Welding Required\u003cbr\u003e» Roller Bearing Ends\u003cbr\u003e» Bar is Silver Zinc Plated\u003cbr\u003e» Tig Welded in Billet Steel Fixtures\u003cbr\u003e» Eliminates Body Roll \u0026amp; Stabilizes the car\u003cbr\u003e» Double Arm Design for Higher HP Applications\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\n\u003cstrong\u003e\u003cspan style=\"font-size: small;\"\u003eWishbone Rear End Locator Features\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e» Eliminates Binding\u003cbr\u003e» Weld in installation\u003cbr\u003e» Chrome Moly Tubing\u003cbr\u003e» Silver Powder Coated Finish\u003cbr\u003e» Fits both 8.8\" and 9\" Rear Ends\u003cbr\u003e» Maintains rear end positioning in Extreme HP Load or Tire Shake\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003ch2\u003e\u003cstrong\u003eFits These Vehicles:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 LX GT GTS Mustang Mach 1 Bullitt Cobra Shelby Roush Saleen \u0026amp; Vehicles.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e*Does not work on cars with IRS.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cp class=\"caption-display\"\u003e\u003cspan style=\"font-size: medium;\"\u003e\u003cstrong\u003eMade in the USA!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"caption-display\"\u003e\u003cstrong\u003eQ \u0026amp; A\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class='tab-2\"'\u003e\n\u003cp class=\"caption-display\"\u003e\u003cstrong\u003eQuestion:\u003c\/strong\u003e Why do I need an anti roll bar?\u003cbr\u003e\u003cstrong\u003eAnswer:\u003c\/strong\u003e The factory sway bar has rubber bushings and will only limit body roll to a certain point. You will end up with body roll and the car will feel loose going down the track. The anti roll bar will keep the rear end square to the body and make the car more stable going down the track.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cstrong\u003eQuestion:\u003c\/strong\u003e How do you set an anti roll bar once it's installed?\u003cbr\u003e\u003cstrong\u003eAnswer:\u003c\/strong\u003e This will take two people to accomplish. First you want the car at race weight just like it will go down the track with fuel, driver in the seat, etc... Next adjust the links so there is 2-3\" of space between the top of the arms on the bar and the floor. Last step you will set the passenger side link to neutral, so there is no tension on it and you can slide the bolt in and out of the end links.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eQuestion:\u003c\/strong\u003e Can the Wishbone be used on my street car?\u003cbr\u003e\u003cstrong\u003eAnswer:\u003c\/strong\u003e No this is made for track use only and should not be used on cars driven on the street.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eQuestion:\u003c\/strong\u003e Can I remove the upper or lower control arms while the Wishbone is on?\u003cbr\u003e\u003cstrong\u003eAnswer:\u003c\/strong\u003e No the wishbone should be unbolted prior to remove any of your upper or lower control arms.\n\u003c\/div\u003e","brand":"UPR Products","offers":[{"title":"Default Title","offer_id":45135732768945,"sku":"2000-100","price":744.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/3307\/8705\/files\/yhst-37354654005614_2270_476105321__08017.1511302130.1280.1280.gif?v=1775484342"},{"product_id":"79-04-mustang-pro-street-chrome-moly-anti-roll-bar-kit","title":"Pro Street Chrome Moly Anti Roll Bar Kit (fits 79-04 Mustang) UPR","description":"\u003cdiv class=\"caption-display\"\u003e    For your Street driven, track ready Mustang UPR's Pro Street Anti-Roll Bar fills the gap between a stock replacement sway bar and race style anti-roll bar.  Effectively eliminates body roll and stabilizes the car down the track. Mounts under the axle for plenty of exhaust clearance and features a hollow 1 1\/4\" Chrome Moly 1\/4\" wall bar with Billet Steel Arms. Fully welded in a Billet Steel Fixture for a perfect fit.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003eInstalls in 45-90 minutes, welding of linkage arm mounts to subframe is required.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003ch2 class=\"caption-display\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e» Billet Steel Arms\u003cbr\u003e» Tig Welded in Billet Steel Fixtures\u003cbr\u003e» 1 1\/4\" Chrome Moly 1\/4\" wall Hollow Bar\u003cbr\u003e» Bar \u0026amp; Box mounts are Silver Zinc Plated\u003cbr\u003e» Eliminates Body Roll \u0026amp; Stabilizes the car\u003cbr\u003e» Sway Bar Assembly bolts onto the housing\u003cbr\u003e» Urethane Bushing w\/Billet Aluminum Mounts\u003cbr\u003e» Welding of linkage mounts to subframe required\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003ch2 class=\"caption-display\"\u003e\u003cspan style=\"font-size: large;\"\u003e\u003cstrong\u003eFits These Vehicles:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999* 2000 2001* 2002 2003* 2004* LX GT GTS Mustang Mach 1 Bullitt Cobra Shelby Roush Saleen \u0026amp; Vehicles.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e*Does not work on cars with IRS.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e*Applicable for 8.8\" rear ends only\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003ch2 class=\"caption-display\"\u003e\n\u003cstrong\u003e\u003cspan style=\"font-size: medium;\"\u003eMade in the USA!\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e","brand":"UPR Products","offers":[{"title":"Default Title","offer_id":45195980144817,"sku":"2000-07","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/3307\/8705\/files\/2000-07_Pro_street_Anti_Roll__06441.1582906059.1280.1280.png?v=1774744709"},{"product_id":"79-04-mustang-pro-series-chrome-moly-anti-roll-bar-kit","title":"Pro-Series™ Chrome Moly Anti Roll Bar Kit (fits 79-04 Mustang) UPR","description":"\u003cdiv class=\"caption-display\"\u003e     The UPR Anti-Roll Bar is part of the \u003cspan style=\"font-family: serpentinedbol;\"\u003ePro-Series\u003c\/span\u003e ™ Suspension Kit used by all our racers in eliminating body roll and stabilizing the car down the track. Our Anti Roll Bar features roller bearings and solid 1 1\/4\" bar to ensure the smoothest reacting kit available! Fully welded in a Billet Steel Fixture for a perfect fit. Does not work with stock tailpipes. Anti-roll bar is designed for drag race use only. Links must be disconnected while driving on street to prevent damage.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003eInstalls in 2-3 hours, welding is required and mounting hardware is included.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e» 1 1\/4\" Solid Bar\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e» Welding Required\u003cbr\u003e» Roller Bearing Ends\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e» Installs in 2-3 Hours\u003cbr\u003e» Bar is Silver Zinc Plated\u003cbr\u003e» Tig Welded in Billet Steel Fixtures\u003cbr\u003e» Eliminates Body Roll \u0026amp; Stabilizes the car\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch2\u003e\u003cstrong\u003eFits These Vehicles:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999* 2000 2001* 2002 2003* 2004* LX GT GTS Mustang Mach 1 Bullitt Cobra Shelby Roush Saleen \u0026amp; Vehicles.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e*Does not work on cars with IRS.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class='tab-3\"'\u003e\n\u003cp class=\"tab-title\"\u003e\u003cstrong\u003eQ \u0026amp; A\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"tab-content\"\u003e\n\u003cstrong\u003eQuestion:\u003c\/strong\u003e Why do I need an anti roll bar? \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAnswer:\u003c\/strong\u003e The factory sway bar has rubber bushings and will only limit body roll to a certain point. You will end up with body roll and the car will feel loose going down the track. The anti roll bar will keep the rear end square to the body and make the car more stable going down the track.\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\n\u003cbr\u003e\u003cstrong\u003eQuestion:\u003c\/strong\u003e How do I know if I need a single or double Anti Roll bar? \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAnswer:\u003c\/strong\u003e We recommend the double anti roll bar when customers are making over 800 HP or running 5 second 1\/8 mile or 8 second 1\/4 mile times.\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\n\u003cbr\u003e\u003cstrong\u003eQuestion:\u003c\/strong\u003e How do you set an anti roll bar once it's installed? \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAnswer:\u003c\/strong\u003e This will take two people to accomplish. First you want the car at race weight just like it will go down the track with fuel, driver in the seat, etc... Next adjust the links so there is 2-3\" of space between the top of the arms on the bar and the floor. Last step you will set the passenger side link to neutral, so there is no tension on it and you can slide the bolt in and out of the end links.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"UPR Products","offers":[{"title":"Default Title","offer_id":45136496492721,"sku":"2000-01","price":284.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/3307\/8705\/files\/79-04-mustang-pro-series-chrome-moly-anti-roll-bar-kit-5__10113.1511302132.1280.1280.jpg?v=1775481733"},{"product_id":"79-14-mustang-street-anti-roll-bar-delrin-bushing-upgrade","title":"Street Anti Roll Bar Delrin Bushing Upgrade (fits 79-14 Mustang) UPR","description":"\u003cp\u003e     Upgrade your urethane anti roll bar bushings in your 79-04 or 05-14 UPR Pro Street anti roll bar kit with these Delrin bushings. These bushings will eliminate all bushing deflection and are a must in high horsepower street cars.\u003c\/p\u003e\n\u003cp\u003eInstalls in minutes.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e» 4 pc Delrin Bushing Kit\u003cbr\u003e» Less Body Roll compared to Urethane\u003cbr\u003e» Direct Replacement for UPR Pro Street Anti Roll Bar Urethane Bushings\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFits These Vehicles:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 5.0L 4.6L 5.4L 5.8L GT Bullitt GT500 Mustang Shelby\u003c\/p\u003e\n\u003cp\u003eFits UPR 2000-04 and 2000-07 Pro-Street Anti Roll Bars.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA!\u003c\/strong\u003e\u003c\/p\u003e","brand":"UPR Products","offers":[{"title":"Default Title","offer_id":45136614981809,"sku":"2026-42","price":74.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/3307\/8705\/files\/2026-42__77675.1565379117.1280.1280.jpg?v=1775478601"},{"product_id":"05-14-mustang-street-anti-roll-bar-billet-mounts-2000-04","title":"Street Anti Roll Bar Billet Mounts 2000-04 (fits 05-14 Mustang) UPR","description":"\u003cp\u003e     Replacement Billet Mounts for your UPR Street Anti Roll Bar Kit. 4pc Kit\u003c\/p\u003e\n\u003cp\u003eInstalls 30 minutes or less\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e» 4 pc Urethane Bushing Kit\u003cbr\u003e» 2pc Billet Mount\u003cbr\u003e» Direct Replacement for UPR Pro Street Anti Roll Bar \u003cstrong\u003e2000-04\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFits These Vehicles:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eFits UPR 2000-04 Pro-Street Anti Roll Bars. 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 5.0L 4.6L 5.4L 5.8L GT Bullitt GT500 Mustang Shelby\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA!\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"UPR Products","offers":[{"title":"Default Title","offer_id":45136693592241,"sku":"2026-37","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/3307\/8705\/files\/2026-37__68798.1643059785.1280.1280.jpg?v=1775478102"},{"product_id":"05-14-mustang-street-anti-roll-bar-axle-mounting-tabs-2000-04","title":"Street Anti Roll Bar Axle Mounting Tabs 2000-04 (fits 05-14 Mustang) UPR","description":"\u003cp\u003e     Replacement Axle Mounting Tabs for your UPR Street Anti Roll Bar Kit. 4pc Kit\u003c\/p\u003e\n\u003cp\u003eInstalls 60 minutes or less\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e» 4pc Mild Steel Axle Mounting Tabs\u003cbr\u003e» Direct Replacement for UPR Pro Street Anti Roll Bar \u003cstrong\u003e2000-04\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFits These Vehicles:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eFits UPR 2000-04 Pro-Street Anti Roll Bars. 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 5.0L 4.6L 5.4L 5.8L GT Bullitt GT500 Mustang Shelby\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"UPR Products","offers":[{"title":"Default Title","offer_id":45136694313137,"sku":"2026-49","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/3307\/8705\/files\/2026-49__58590.1643061648.1280.1280.jpg?v=1775478088"},{"product_id":"79-04-ford-mustang-anti-roll-bar-axle-tabs","title":"Anti Roll Bar Axle Tabs (fits 79-04 Ford Mustang) UPR","description":"\u003cdiv class=\"caption-display\"\u003e     Replacement UPR Anti Roll Bar Axle Mounting Tabs that fit all 79-04 Mustang kits.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003eInstalls in 1 hour, welding is required.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch2 class=\"caption-display\"\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e» Welding Required\u003cbr\u003e» 4pc Mild Steel Tabs\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e» 4pc Grade 8 Bolts \u0026amp; Nuts\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e» Fits 79-04 Mustang UPR Anti Roll Bars\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch2 class=\"caption-display\"\u003e\u003cstrong\u003eFits These Vehicles:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003* 2004* LX GT GTS Mustang Mach 1 Bullitt Cobra Shelby Roush Saleen \u0026amp; Vehicles.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e* Does not work on cars with IRS.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\n\u003cstrong\u003eMade in the USA!\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e","brand":"UPR Products","offers":[{"title":"Default Title","offer_id":45136694739121,"sku":"2026-27","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/3307\/8705\/files\/2026-27__19592.1643128490.1280.1280.jpg?v=1775478073"},{"product_id":"79-04-mustang-pro-series-bolt-in-chrome-moly-anti-roll-bar-kit","title":"Pro-Series™ Bolt In Chrome Moly Anti Roll Bar Kit (fits 79-04 Mustang) UPR","description":"\u003cdiv class=\"caption-display\"\u003e     The UPR Bolt In Anti-Roll Bar is part of the \u003cspan style=\"font-family: serpentinedbol;\"\u003ePro-Series\u003c\/span\u003e™ Suspension Kit used by all our racers in eliminating body roll and stabilizing the car down the track. Our Anti Roll Bar features roller bearings and solid 1 1\/4\" bar to ensure the smoothest reacting kit available! Fully welded in a Billet Steel Fixture for a perfect fit. Does not work with stock tailpipes. Anti-roll bar is designed for drag race use only. Links must be disconnected while driving on street to prevent damage. Bolt in bearing ends allows for easy removal of the bar from the car.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003eInstalls in 2-3 hours, welding is required and mounting hardware is included.\u003c\/p\u003e\n\u003ch2 class=\"caption-display\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e» 1 1\/4\" Solid Bar\u003cbr\u003e» Welding Required\u003cbr\u003e» Roller Bearing Ends\u003cbr\u003e» Bar is Silver Powder Coated\u003cbr\u003e» Tig Welded in Billet Steel Fixtures\u003cbr\u003e» Eliminates Body Roll \u0026amp; Stabilizes the car\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e» Bolt in Bearing Ends Allow for bar to be removeable \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003ch2\u003e\u003cstrong\u003eFits These Vehicles:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999* 2000 2001* 2002 2003* 2004* LX GT GTS Mustang Mach 1 Bullitt Cobra Shelby Roush Saleen \u0026amp; Vehicles.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e*Does not work on cars with IRS.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e  \u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003cstrong\u003eQ \u0026amp; A\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class='tab-3\"'\u003e\n\u003cdiv class=\"tab-content\"\u003e\n\u003cstrong\u003eQuestion:\u003c\/strong\u003e Why do I need an anti roll bar? \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAnswer:\u003c\/strong\u003e The factory sway bar has rubber bushings and will only limit body roll to a certain point. You will end up with body roll and the car will feel loose going down the track. The anti roll bar will keep the rear end square to the body and make the car more stable going down the track.\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\n\u003cbr\u003e\u003cstrong\u003eQuestion:\u003c\/strong\u003e How do I know if I need a single or double Anti Roll bar? \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAnswer:\u003c\/strong\u003e We recommend the double anti roll bar when customers are making over 800 HP or running 5 second 1\/8 mile or 8 second 1\/4 mile times.\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\n\u003cbr\u003e\u003cstrong\u003eQuestion:\u003c\/strong\u003e How do you set an anti roll bar once it's installed? \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAnswer:\u003c\/strong\u003e This will take two people to accomplish. First you want the car at race weight just like it will go down the track with fuel, driver in the seat, etc... Next adjust the links so there is 2-3\" of space between the top of the arms on the bar and the floor. Last step you will set the passenger side link to neutral, so there is no tension on it and you can slide the bolt in and out of the end links.\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"UPR Products","offers":[{"title":"Default Title","offer_id":45136711516337,"sku":"2000-08","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/3307\/8705\/files\/2000-08__27515.1648759952.1280.1280.jpg?v=1775474941"},{"product_id":"79-04-ford-mustang-bolt-in-anti-roll-bar-bearing-cups","title":"Bolt In Anti Roll Bar Bearing Cups (fits 79-04 Ford Mustang) UPR","description":"\u003cdiv class=\"caption-display\"\u003e     Replacement UPR Anti Roll Bar Bearing Cups with needle roller bearings that fit the 79-04 Mustang bolt in anti roll bar kit part number \u003ca href=\"%%GLOBAL_ShopPathSSL%%\/79-04-mustang-pro-series-bolt-in-chrome-moly-anti-roll-bar-kit\/\"\u003e2000-08\u003c\/a\u003e.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003eInstalls in 1-2 hours, welding is required.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"caption-display\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e» Bolt In ARB Cups\/Bearings \u003cbr\u003e» Roller Bearing Ends\u003cbr\u003e» Fits 79-04 Mustang UPR Bolt In Anti Roll Bars\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"caption-display\"\u003e\n\u003cstrong\u003eFits These Vehicles:\u003c\/strong\u003e \u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003* 2004* LX GT GTS Mustang Mach 1 Bullitt Cobra Shelby Roush Saleen \u0026amp; Vehicles.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e* Does not work on cars with IRS.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\n\u003cstrong\u003e Made in the USA!\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e","brand":"UPR Products","offers":[{"title":"Default Title","offer_id":45136883351729,"sku":"2026-62","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/3307\/8705\/files\/79-04-ford-mustang-anti-roll-bar-bearing-cups-3__15073.1709242856.1280.1280.jpg?v=1775468059"},{"product_id":"adjustable-front-sway-bar-end-links-lowered-fits-05-14-mustang-upr","title":"Adjustable Front Sway Bar End Links Lowered 1.5\"+ (fits 05-14 Mustang) UPR","description":"\u003cdiv class=\"caption-display\"\u003e\n\u003cdiv class=\"caption-display\"\u003e     Adjust your front sway bar with confidence with these new Race Adjustable Billet Sway Bar End Links for your 2005-2014 Mustang lowered more than 1.5\". Double adjustable for easy on the car adjustment and Teflon lined rod ends eliminate all slop the factory end links allow.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003eCNC Machined from 6061 Billet Aluminum and includes Teflon lined rod ends for ultimate durability.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch2 class=\"caption-display\"\u003e\u003cstrong\u003eProduct Features:\u003c\/strong\u003e\u003c\/h2\u003e\n» Billet Race Adjustable Sway Bar End Links\u003cbr\u003e» CNC Machined 6061 Billet Aluminum\u003cbr\u003e» 8\" Closed and 10\" Open\u003cbr\u003e» Teflon lined Rod Ends\u003cbr\u003e» Double Adjustable\u003cbr\u003e» Brushed Satin Finish\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003ch2 class=\"caption-display\"\u003e\u003cstrong\u003eFits These Vehicles:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cdiv class=\"caption-display\"\u003e2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Mustang 4.6L 5.4L 5.0L 4V 3V V6 V8 GT GT500 Shelby Saleen and Roush Vehicles.\u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"caption-display\"\u003e\n\u003cstrong\u003eMade in the USA!\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e","brand":"UPR Products","offers":[{"title":"Default Title","offer_id":47334336299185,"sku":"2011-02","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/3307\/8705\/files\/2011-02b.jpg?v=1779828286"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0675\/3307\/8705\/collections\/upr-sway-bars-anti-roll-bars.jpg?v=1776476150","url":"https:\/\/www.uprproducts.com\/collections\/anti-roll-bars.oembed","provider":"UPR Products","version":"1.0","type":"link"}