null
close
close
561.588.6630

Order Hotline

click to zoom in
  • Proven Products

    Race & Street Proven

  • In-House Experts

    We're here to help

  • Easy Installation

    Quick & Easy Install

  • Wordwide Delivery

    We ship worldwide!

2020-2022 GT500 5.2L (With Whipple Supercharger) Oil Catch Can Plug N Play ™ Separator

No reviews yet Write a Review
$199.99
SKU:
5049-262-1
Instructions:
Click to Download PDF

2020-2022 GT500 5.2L (With Whipple Supercharger) Oil Catch Can Plug N Play ™ Separator

$199.99

2020-2022 GT500 5.2L (With Whipple Supercharger) Oil Catch Can Plug N Play ™ Separator

$199.99
      UPR's NEW Single Valve Plug N Play ™ Compact Catch Can kit for the 2020 to 22 Ford Shelby GT500 equipped with a Whipple Gen 5 Supercharger. Our easy to install adjustable mounting bracket is the perfect fit for your Shelby's cramped engine compartment. The mounting location allows room for modifications like larger Whipple superchargers and larger intercooler tubing. With it's extremely efficient compact design and Incredible Looks! We went the extra mile to ensure you get the best quality components. Utilizing Continental Braided Hose and Billet Hose Ends to give you the Strongest and Best Performing Setup Possible. No cheap stock lines that have been cut and spliced on! Your GT500 deserves the BEST! Featuring the New UPR Plug N Play ™ Catch Can Fittings (UPR Exclusive Push Button Fittings) So you can remove and empty the catch can without tools. We have hundreds of hours testing our new Oil Separator to ensure the claims and results will exceed your expectations. We even adjusted the angle of the oil containment chamber slightly to clear the valve covers. No cheap looking, basic catch can here! The design of this unit is more along the lines of a True Engineer and cannot be compared or confused with units that have side by inlets and outlets with screen rolled up and shoved in them. The 4 chamber technology in UPR catch cans captures and filters all the oil vapor and trash from getting into your air intake tract. That's the most important reason for a catch can in the first place! This kit also has the option to add the UPR CSS - Clean Side Separator for the Driver side of the PCV system to make sure you are fully protected at both ends of the PCV system. (Great protection and ideal for all driving situations) Manufactured from Domestic T-6 6061 Aluminum bar stock and finished off using only the best Diamond cutters to exceed your expectations of what a superior product should fit and look like. UPR is the largest aftermarket catch can manufacturer in the country. Continually improving our designs to stay ahead of the competition and give you the cutting edge technology of tomorrow today. We are so confident we offer an unconditional warranty on our products to let you know you can always count on UPRproducts.


For a larger capacity catch can for stock GT-500 Mustangs, see part number 5030-262-1-CSS.

THIS PART DOES NOT CARRY AN CARB EO NUMBER, AND THEREFORE IS FOR RACING / OFF ROAD USE ONLY. NOT FOR SALE OR USE IN CALIFORNIA DUE TO CARB/EMISSIONS. ALL CALIFORNIA ORDERS WILL BE CANCELLED AND REFUNDED

This UPR catch can kit is 100% ready to install with no add ons. The upgrades allow you to custom tailor the kit to your needs if you like. The description for the upgrades are below:

UPR Billet Check Valve: The check valve ensures that airflow only moves in one direction. It will increase the vacuum through the catch can and deliver better crankcase evacuation. The improved crankcase evacuation translates to increased MPG and more responsive low speed drivability. The arrow printed on the check valve will always need to face away from the catch can.

UPR CSS - Clean Side Separator for the Driver side of the PCV system to make sure you are fully protected at both ends of the PCV system. (Great protection and ideal for all driving situations). The Clean Side Separator allows fresh, filtered air from the air filter box or inlet tube to enter the crank case as the factory intended, but will separate oil vapor and keep it from exiting the clean side when crankcase pressure is high. Once normal driving resumes, the air entering the engine will pull the oil mist back in.


Product Features
» 4oz Capacity
» Show Quality Finish
» Compact Catch Can measures 2.25" x 3.5"
» Prevents Oil from Entering Intake/Supercharger
» Innovative Diffuser Tube and Chamber
» High Quality CNC Machined Billet Aluminum
» Plug N Play ™ fittings at Can & Engine connections
» 5/8" Oil Resistant Continental Braided Hose included
» Innovative Adjustable Mounting Bracket (360° Rotation)
» Improves Fuel Economy, Throttle Response & Performance
» High Quality Black Anodized Finish
 

Installation:
Installs in 15 minutes.
 
Includes:
» OEM style 5/8" Factory Connectors
» 5/8" Continental Braided Hoses
» Billet Hose Ends with Clamps
» Billet Adjustable Mounting Bracket
» Plug N Play ™ quick release connectors & billet fittings
» Clean Side Separator available - See Dropdown options
 

Fitment:
2020 2021 2022 Ford Shelby GT500 Mustang S550 Predator 5.2 With Whipple Supercharger
 
 
Made In USA

Q & A

Question: What is the problem with your PCV system ?

Answer: The Positive Crankcase Ventilation (PCV) system is used to recycle the gases that leak or "blow-by" the your engines piston rings and create a positive pressure in the crankcase. By venting these gases along with oil mist/vapor from the crankcase and route it back into the intake manifold so it can be burned off.

This is a poor fix from automobile manufacturers, because over time the excess oil vapor collects along the inside of the intake tract and forms a "sludge". This leads to a variety of issues including carbon build up, retarded timing, detonation, power loss and even engine failure.

UPR s fix for the PCV system used on many engines for reducing toxic gases from being released into the atmosphere and eliminating positive crankcase pressure / Blow-By.



Question: What does a UPR Catch Can do ?

Answer: UPR s Billet Catch Can / oil-air separator will condense and collect the oil vapor before it has any chance to reach the intake tract. As the gas and oil vapor enters UPR s can they pass through a Chambered filtering system that cools the oil vapor and gives it something to adhere to.

Then the oil forms into droplets and collect in the bottom of the UPR Catch Can so that they can later be drained. This is where the additional Chambered filtering system comes into play allowing only the clean air to pass through so it can eliminate unwanted blow by.

All engines have blow by otherwise there would be no need for a PCV system on your engine. PCV = Positive Crankcase Valve, which eliminates Positive Crankcase Pressure. UPR s Catch Can has become one of the most widely used and recommended cures for just about every application.

The engine size and horsepower level is not relevant to the performance of the UPR Catch Can. UPR s Catch Can has become a cornerstone by improving the Performance and Economy on any vehicle you install it on.



Same Day Shipping:

UPR Products ships out all in stock orders via UPS or USPS the same day up till 5pm EST Monday through Friday. Orders received over the weekend will ship out on Monday. Tracking information is emailed to customers the evening after the package has been shipped out. Customers placing internet orders that have discrepancies or are out of stock will be contacted by phone or email.

UPS Ground Transit Times:

Back Orders:

Occasionally some parts that you have ordered will be out of stock. You will be called if any of the parts are out of stock and either hold the order till everything arrives or ship out what we have in stock and ship the remainder when it comes in based on your preference. You will not be charged for any items that are out of stock until the part is ready for shipping.

Canadian Orders:

UPR Products does ship to Canada via USPS. Customers will go through the normal checkout process and our system will estimate the cost of shipping automatically based on your address. Please note - Additional Duties, taxes & Import Fee's may be charged upon arrival.

International Orders:

UPR Products ships internationally but due to frequently changing freight costs it is quoted per order. International customers should include both a phone number and email with their order so you can be contacted with a shipping quote.

How Do I Return a Product:

If you need to return or exchange a product, please call us at 561-588-6630 within 30 days of receiving your order. We will issue a Return Merchandise Authorization (RMA) number which is required to process your return. Products should be shipped back to us via UPS, Fedex, USPS with a tracking number and insurance. All returned items must be in new condition and in the original packaging. Installed items cannot be returned. Contact us within the 30 days of receiving your order for any order issues. You are responsible for all return shipping charges and a 20% restocking fee will apply for any unapproved returns. Please check all parts for damage or defect when you receive your order and prior to installing or using the item.

Non-Returnable Products:

The following items will not be accepted as returns. Tuners and tuning devices, opened and or installed clutches (removed from original packing), non-defective items that have been installed, gift certificates, catch cans, fuel pumps, fuel injectors, nitrous kits, shocks, struts. Issues with any of the listed items must be taken up directly with the manufacturer.

Warranty Policy:

UPR Products offers a lifetime warranty against defects and failure on all products that we manufacture. Contact us at 561-588-6630 for further warranty information.

Magnaflow Warranty / Return Policy:

Magnaflow offers a Lifetime Warranty on their performance exhaust kits.

Magnaflow Warranty Details

Register your Magnaflow Exhaust

For a Magnaflow Warranty Return, complete the following form and contact UPR Products at 561-588-6630.

Magnaflow Warranty Return Form

Worldwide Shipping
Race Proven Parts
Secure Shopping
30-Day Free Returns