2005-2010 Ford Mustang Billet 3 Bolt Belt Tensioner Arm w/76mm Double Bearing Pulley - UPR Products

* Billet 3 Bolt Belt Tensioner w/76mm Double Bearing Pulley
* 100% CNC Machined 6061 Billet Aluminum
* Easy 15 minute installation
* Replaces factory 3 bolt tensioner that is prone to bending and breaking
* Includes Billet 76mm Double Bearing Pulley (same diameter as stock)
* Pulley is Hardcoat Anodized
* Helps reduce belt slip
* 50% Thicker tensioner arm
* Recommended for vehicles with manual transmissions
* Works with both 6 and 8 rib belt systems
* Brushed Satin Finish

Innovative Bold Styling:

Tired of buying factory aluminum or steel belt tensioners that bend, break or get weak over time causing belt slip and belt alignment issues? Have you been hearing belt squeaking noises, power steering feel weak or your AC not as cold even after changing the belt? Chances are your tensioner is going bad or is already bad, don't get left stranded. If the tensioner is weak it will allow the belt to slip slightly causing the belt to glaze over. A glazed belt would be the cause of your squeaking problems, slipping and even throwing the belt off. Replacing the tensioner is the most effective way to cure this problem.

Make the switch to a UPR Billet 3 Bolt Belt Tensioner for your 2005-2010 Ford Mustang GT (fits many other applications, see list below). This all new belt tensioner is 50% thicker than the factory pieces and made from 6061 Billet Aluminum that will prevent any kind of bending or breaking. Includes Billet 76mm hardcoat anodized tensioner pulley with our extreme duty double bearing pulley but will also work with the factory pulley as well. Greatly reduces belt slip especially on manual transmission vehicles that shock the belt system more than automatics.

Custom made spring for better belt tension and built with custom needle bearings and SS races for smooth tensioner movement throughout it's operating range. This is all backed by our lifetime guarantee!

Our Quality & Finish will leave you with a grin from ear to ear as it is the Best looking unit available for your Ford Mustang or Cobra.

Quality Construction:

CNC Machined from 6061 Billet Aluminum and finished with the latest in Diamond cut technology, which uses a special diamond cutter on the finishing pass giving you the best looking billet part possible not the dull silver finish some companies offer.

No one else can Stack up to the bold clean styling of our aftermarket Billet / Stainless Steel Dress Ups, Street / Strip / Racing Suspension and Performance Parts for your American Muscle Car like UPR Products!

Installs in 15 minutes or less with normal hand tools using factory hardware.

Click Here for Instructions

Fits these Vehicles:

2005 2006 2007 2008 2009 2010 Ford Mustang GT V8 Shelby GT Bullitt Steeda Roush & Saleen Vehicles.
2003 2004 Mustang Cobra Accessory Tensioner*
2005 2006 Ford GT Supercar
1999 2000 2001 2002 2003 2004 Ford Lightning Harley Davidson Truck
2001 2003 2004 2005 2006 2007 2008 Ford F-150 F150
2003 2004 2005 2006 2007 2008 Ford Expedition SUV Superduty E150 E250 E350 E450 F250 F350 F450 F550
2002 2003 2004 2005 2006 2007 2008 Ford Explorer Eddie Bauer Sport Trac
2002 2003 2004 2005 2006 2007 2008 Mercury Mountaineer
2003 2004 2005 Lincoln Aviator
2002 Lincoln Blackwood
2006 2007 2008 Lincoln Mark
2003 2004 2005 2006 2007 2008 Lincoln Navigator
2007 Lincoln Town Car


*Accessory tensioner must use either stock pulley or flip Billet pulley around to clear timing cover. See tensioner arm for Supercharger tensioner.

Made in the USA!